installation

After a failed flashing attempt(don’t attempt to tftp flash u-boot.kwb from within U-Boot!) I needed to use JTAG combined with the included JTAG adapter. To do this, make sure that the UART cable is unplugged, and the JTAG cable is plugged in(unplug/replug the USB adapter just to be safe). First grab the guruplug-installer package, then grab a known-good copy of U-Boot. $ cd Downloads/ $ tar zxvf Guruplug-installer.tar.gz $ cd guruplug-installer $ sudo .

Warning: This information comes without a warranty. I wont guarantee support if you break your hardware. Im not responsible for anything you do with this information. For entertainment purposes only. I`m probably lying. 1. Obtain your Windows ISO. Probably using MSDNAA or something. 2. Make sure your hard drive is partitioned properly. This means leaving one partition open for windows. Make sure it`s easily identifiable from the windows installer(I give Windows 120GB of my 160GB drive).